What are the Advantages of Installing Cornell Rolling Fire Doors ESD20 for Grocery Store or Property Management Facility in Farmville, NC

If you have ever specified a commercial rolling steel door and a rolling fire door, you know that they look very similar to each other. There is much more to a Cornell rolling fire doors in Farmville and Angier  NC  than meets the eye.  

Passport Door and Docks System, a Division of DuraServ provides the best quality commercial rolling fire doors to North Carolina, Angier NC & Farmville NC and surrounding areas. Whether your commercial door interests lie in energy efficiency, fire protection, function ability, or aesthetic appearance; the professionals at Passport Door and Docks System, a Division of DuraServ have the experience to match the right door with your commercial property needs in Angier NC and Farmville NC. 

Cornell rolling fire doors North Carolina are built to maintain proper temperatures and reduce unwanted sound transmissions. These exterior use doors assist in differentiating two separate temperatures on opposite sides of the door, ideal when the building requires not only climate control but security and durability, just like what the grocery store or property management facility in Farmville, NC. A low maintenance door that provides low life cycle expenses. Foam insulation offers superior protection against inclement weather, heightened security and lower noise transmission. Here are the features of installing Cornell Rolling Fire Doors ESD20 for a grocery store or property management facility in Farmville, NC. 

Key Product Features:

·         Product warrantied for 50,000 cycles as standard.

·         Sound Transmission Class (STC) rating is up to 32 for the entire assembly.

·         Galvanized steel curtain with matching hood, featuring GalvaNex™ polyester enamel finish in four standard colors.

·         Flame Spread Index of 0 and a Smoke Developed Index of 10 as tested per ASTM E84.

·         The slat has an R-value of 8.0 as calculated using the ASHRAE Handbook of Fundamentals.

Slat Profile:

·         Flat

Slat Thickness:

·         20 gauge standard, also available in 18, 22 and 24 gauge

Slat Insulation:

·         Insulated, with an R-value of 8.0

Maximum Opening Size:

·         30’ x 30’

Operation Type:

·         Motor

·         Chain

·         Crank

·         Manual push-up

Colour Options:

·         Standard Colours are Grey, Tan, Brown & White

·         SpectraShield® Powder Coating in more than 180 colors

 When it comes to application, a Cornell rolling service door is most often used in the building envelope to provide climate separation and security. It may also be used on interior walls to separate conditioned spaces or to enhance sound conditioning. Cornell rolling fire door is sometimes used on exterior walls to meet code mandates but is most often employed to help compartmentalize a building by closing openings in firewalls, fire barriers, and smoke barrier walls. Cornell rolling fire door is designed to provide fire resistance matching the rating of the wall to which it is installed, allowing active systems, such as sprinklers, to suppress the compartmentalized fire event until firefighters arrive to take over the fight. Cornell rolling fire door may also be asked to mitigate the migration of smoke throughout the grocery store or a property management facility in Farmville, NC. 

From rolling fire doors to high-speed doors, we’ve got them all at Passport Doors and Dock System. You can be confident that, whatever the application, we’ve got the right doors. For the right door for your commercial property, call Passport Doors and Dock System today!

What is a Dock Seal and Its Types?

What is a dock seal? 

Dock seals are made up of foam pads wherein the trailer compresses back when it comes to rest against the dock bumpers and it forms into a seal around the three sides of the trailer. Normally, dock seals allow a tight seal for a low price and can become worn out easily when used at loading docks with heavy traffic. Dock seals are best used when there is a slight difference in the size and style of trailers that are being served. 

Types of Dock Seals

Maintenance for the right internal docking facility temperature is seriously important as the flow of air pressure coming in and out from even the tiniest gaps and openings can bring you a big cost in every sense of the word. Below are the types of dock seals that give you protection from risks and to save on energy cost. 

Serco S2000 Ultra Seal with head Curtain

The Serco Ultra Seal with head curtain covers the same flexible design with the addition of an adjustable head curtain that enhances the seal’s effectiveness by obliging different kinds of trailer heights. 

Serco S600 Dock Seal with fixed head pad

Serco dock seal with fixed head pad is ideal for smaller doors. It supplies a positive seal in between the internal and external environments. It automatically seals while the vehicle is backed against the foam pads. The fixed head pad is built of heavy-duty construction and it includes roll-formed Serco Steel T galvanized steel and offers a long life with less maintenance. 

Serco S3000 L-Pad dock seal

Serco L Pad dock seal is a foam type of dock seal gives full-width access to the vehicle when docked at doors that are 9 inches high. It features a compression foam head pad with L-shaped side pads and rugged, roll-formed Serco steel galvanized steel framing. 

Serco S800 Dock seal with adjustable head pad

Serco dock seal with adjustable head pad offers an excellent sealing on a full range of trailer heights. It has a manual adjustable head pad that allows you to position the head pad on a 48 inches vertical track. 

Serco S700 Dock seal with head curtain

Serco dock seal with head curtain. It is a hooded style kind of dock seal because of its head curtain that seals the rear of the vehicle. It has ideal doors that are 9 inches higher or taller. End caps secure the drop curtain to the side pads and has durable fiberglass that provides stiffness in the top side of the curtain. 

Serco S3000HL L-Pad Dock seal with head curtain

Serco L pad dock seal with head curtain has features of a modular hooded style that does not flatten due to extra projection that is required on similar competitive models. It is also equipped with the standard rugged, roll-formed Serco steel galvanized steel framing. 

Serco S2500G Sliding Head Pad dock seal

Serco sliding head pad dock seal is moving vertically, lessened a wear on your head pad and side pads and increasing the life of your dock seal for loading dock solutions. It has durable head pad slides up to six inches. This dock seal will enhance seal performance at your loading dock. 

If you are looking for dock seals with high quality, durable and safe, Passport Door & Dock Systems is the best place to go. We also serve in North Carolina, Angier, NC and Farmville, NC. For service request contact in our phone numbers: Angier: (919) 639-0334 | Farmville: (252) 753-6100 or visit our website at https://www.passportdockanddoor.com/contact/ or https://www.passportdockanddoor.com/service-request/.

Retail Pro™ Single Leaf Manually Operated Horizontal Sliding Door Designed for Retail Industry Needs in Farmville, NC

A retail industry with a low-end door suffers from inefficiency because of the fact that the door hinders the swift passage of the lifters that carries the goods and commodities. 

In this relation, the products and services of a proficient door company are vital. If you are in Farmville, North Carolina, you may avail of the products and services of Passport Door & Dock Systems, a division of DuraServ Corp.

We have been serving the residents of Farmville, NC since 1995 and we are able to keep the dock doors working safely and efficiently. Our products and services are exceptional and are assembled with a high technology approach. Apart from the dock equipment, we also provide high-quality retail industry doors. 

We are the distributor of Retail Pro™ Single Leaf Manually Operated Horizontal Sliding Door and it is specifically designed for the needs of the retail industry. This door has the following good features:

1. Diamond-Trac® Roller System

2. Freezer or cooler

3. White Metal clad finish

4. Available with bump open bar

5. Kickplates and edge guard options

6. One Year Limited Warranty

The Diamond-Trac Roller is a patented system that facilitates the smooth, quiet gliding action that is incomparable with the other kinds of door types. Its superior sealing quality is affected by its down-and-in motion that pushes the entire door tightly against the gasketed casing and floor.

Moreover, we have trained and highly-skilled technicians who are efficient and effective to undertake the installation of this door. 

For your needs about Retail Pro™ Single Leaf Manually Operated Horizontal Sliding Door, Manually Operated Horizontal Sliding Door, high-performance doors, high-speed doors, Manually Operated Horizontal Sliding Door Farmville NC, Manually Operated Horizontal Sliding Door Angier NC, and Manually Operated Horizontal Sliding Door North Carolina, please visit our official website to learn more about our products at https://www.passportdockanddoor.com/products/door-products/high-performance-doors-2/#RetailPro%E2%84%A2SingleLeafManuallyOperatedHorizontalSlidingDoor

For your queries, you may reach us at the following telephone numbers: 

·         Angier: (919) 639-0334

·         Farmville: (252) 753-6100

You may also contact us through email via https://www.passportdockanddoor.com/contact/. Further, you may also send us your service request through this webpage https://www.passportdockanddoor.com/service-request/.

Our service areas are open to serve you better in North Carolina, Angier NC & Farmville NC.

Our committed coordinators await your call so that we could extend our utmost assistance to meet your needs. 

What are the Four Specialty Dock Levelers Offered by PassPort Door & Dock Systems in Angier, NC

Passport Door and Dock Systems has a good reputation over the years that formulate their four specialty dock levelers, can be of any choice and use. 

Passport Door and Dock Systems offers specialty dock levelers in Angier, and Farmville North Carolina. Over the years, they have the latest technology proven to provide quality commercial doors and efficient docks for your convenience. Passport Door and Dock Systems also specifies the cruciality of climate control operations to make sure that by the North Carolina climate, the dock leveler will function well.

Here are the four specialty dock levelers and its key highlights, Passport Door and Dock Systems 

formulated to give your business a flawless idea of efficiency namely: Serco Versadock Dock Leveler,Serco Power-Assisted Dock Leveler Model PAL, Serco Vertical Dock Leveler, and Serco Vertical Hydraulic Rail Leveler.

Serco Versadock Dock Leveler

Known for its weather seal, these docks have air-ride suspension, high capacity trailers, use of low profile tires and truck bed heights that can be extended beyond reach that most of the convenient levelers do. With trailer widths averaging to 8’ 6” and conventional 7’ 0” wide leveler makes little or no room for maneuvering it. Like any other Passport Door and Dock Systems, it has below-dock end loading capability.

Serco Power-Assisted Dock Leveler Model PAL

Unlike Versadock leveler, it is designed to maintain the efficiency of the operation 24/7 when there is a power failure during the loading and unloading. It is easy to use a manual override device, which means, this can be used manually. And same as the other Serco models, it has an exclusive reflex that is an Anti-Stump out system that provides fluid free motion while providing a free fall protection measure the times of altered trailer separation.

Serco Vertical Dock Leveler

Has the integral maintenance locking bar with a lockout at tag out capability. This will help prevent  contact with a hazard while performing tasks that require the removal and by-passing, or deactivation of loading docks. The unintended release of hazardous energy-stored energy, and the unintentional start-up or motion of loading docks. It also has indicator lights for precautionary measures, and PLC programmable controller. 

Serco Vertical Hydraulic Rail Leveler

Engineered for rail car operations. With its safety features, Rail Leveler is an ideal solution to increase effectiveness during loading operations because on its manual side shift units, the rail leveler brake prevents the side shifting when it is lowered that might cause potential falling of loads that causes accidents at some point.

These loading dock levelers are available within the area of Farmville and Angier, North Carolina. For more inquiries and other detailed specifications regarding each docks and its area of focus, please call: Angier: (919) 639-0334 and Farmville: (252) 753-6100 for our specialty dock levelers Angier NC, specialty dock levelers Farmville NC, and specialty dock levelers North Carolina.

Or you may check our website at https://www.passportdockanddoor.com/contact/, or make a Service Request at https://www.passportdockanddoor.com/service-request/.

Rytec Fast Seal Model FS1500 Best Exterior High-Speed Door for Commercial and Industrial Applications in Farmville, North Carolina

Passport Door & Dock System’s Rytec Fast Seal Model FS1500 Roll Door or Model FS1500 Roll Door is the roll-up door solution that has a lot to offer than just for business profits.

Highly Durable

Rytec Fast Seal Model FS1500 door is designed for exterior environmental conditions. Highly reliable to different atmospheric conditions, and weather-resistant under different harsh environments. Custom designed such that rather than subsidence all the way down to slippery on tracks, these forms of doors take a number of overhead idle areas with convenience and simple access.

Fast 

Model FS1500 Roll Door is Rytec’s high-performance doors, enhance additional options to form an additional economical approach by formulating a high-speed door that opens up at fifty inches per second!

Engineered with Rytec’s high-speed doors, safe for its twin electrical photograph within the column and reversing go up the lowest bar. Exchangeable windows for visibility unlike the other rolling doors within the market, its proprietary, freelance style separates counterbalance from door tension allowing effective breakaway and therefore the ability to handle air current hundreds and negative pressure.

Safe and Secured

Rytec Fast Seal Model FS1500 roll doors are made from strong steel that gives thieves second thoughts in robbing on your business establishments. Moreover, the material needs very little to no additional maintenance, which makes them additional reliable than other common doors.

Self-Maintenance Feature

Featured with Patented Break-Away bottom bar, can reset in barely seconds, without tools, nearly eliminating the period of time and repair prices. Proprietary Break-away bottom bars area unit extruded, the bottom bar is capable of breaking away in direction while not injury to the bar, reversing edge or facet columns. Moreover, Rytec Fast Seal Model FS1500 roll door has a low maintenance style that comes with a lifetime warranty on all counterweights and tension springs.

Versatile 

Rytec Fast Seal Model FS1500 can offer several scales of up to 30’ W x 24’ H, and 12”, 14” & 17” facet Column Configurations. You can have several optional choices for higher sizes that match your property desires, up to 17” x 17” or 24” x 24” removable windows, either hood, flat or slant with severe duty motor.

High-Tech Designed

Model FS1500 roll door has a Ry-Wi System, the state-of-the-art progressive wireless technology feature which eliminates the necessity for coil wires. Two-way communication and total frequency management ensure safety and eliminate interference. 

So why settle for less if you can give the best for your commercial and industrial needs.

Passport Door & Dock Systems offers this high quality, economical price and effective high-speed roll doors - Rytec Fast Seal Model FS1500, your total exterior roll-up door solution for your commercial and industrial applications in Farmville, North Carolina.

For Inquiries and installations, call Passport Door & Dock Systems at (252) 753-6100 for our Rytec Fast Seal Model FS1500 at Rytec Fast Seal Door Farmville NC, and Rytec Fast Seal Door Angier NC, or you can make a service request at https://www.passportdockanddoor.com/service-request/.

What are the Types of Dock Leveler and Their Advantages

With the advance integration of technology, the warehouse industry becomes efficient. 

To date, the loading and unloading of goods is far more proficient compared to the previous approach. This update has been mainly attributed to the installation of the loading dock system. 

The loading dock system is the setup of the various pieces of equipment, which results in the smooth and effective conduct of goods storage and distribution. These are the consolidation of the following fixtures, among others:

1.    Loading dock barrier;

2.    Loading dock shelter;

3.    Loading dock seal;

4.    Loading dock door; and

5.    Loading dock leveler

It is noteworthy to point that one of the factors that facilitate the continuous loading and unloading of goods is the assembly and installation of the loading dock leveler. Through the utilization of the loading dock leveler, the gap between the loading dock and the floor of the delivery truck trailer is being filled in to affect the smooth passage of the forklift or strollers to deliver and distribute the goods.

This efficient performance of warehousing has something to do with the proficient use of the loading dock leveler. A dock leveler is part of the system that is mounted at the foundation of the loading dock to bridge the gap of the facility and the delivery vehicle. It is primarily comprised of a metal plate known as lip and placed in a stowed position. 

The importance of dock levelers is usually been ignored. Likewise, the recommended maintenance is likewise been forgotten and because of this, the risk that eventualities may transpire sooner becomes imminent. 

The Passport Door & Dock Systems, a division of DuraServ Corp, has the latest technology to make the warehouse and distribution center docks work at maximum efficiency. We designed specialty dock levelers that will surely meet your needs.

As a matter of fact, we design high quality and durable loading dock levelers. The following are the lists of levelers with their respective advantages:

1. Mechanical dock levelers

·         it has a high tensile steel lip, deck & beams

·         it has structural steel safety legs

·         it has a patented POSI-TRAC unlimited float hold-down

·         it has an exclusive HYDRA CAM Plus automatic lip extension

2. Hydraulic dock levelers

·         the utilization of hydraulic dock leveler, the regular maintenance is carried out in a simple and worry-free manner because it does not have the required pull chain operation anymore as compared to the mechanical dock leveler

·         there are six (6) types 

o   Serco Hydraulic Dock Leveler Model HLQ

o   Serco Hydraulic Dock Leveler Model HLR

o   Serco Hydraulic Edge-of-Dock Mode

o   Serco Hydraulic Dock Leveler Model HD

o   Serco Hydraulic Dock Leveler Model HL

o   Serco Hydraulic Dock Leveler Model HFC

3. Air-Powered dock levelers

·         it provides loading docks with cost-effectiveness, versatile wheel restraint solution, and capability to engage and restrain a wide range of trailers at the dock, which includes trucks with lift gates, damaged Rear Impact Guards, and different axle configurations

·         there are three (3) type

o   Serco SLSC Safety-Chock Surface Restraint

o   Serco Manual Safety Chock

o   Serco Universal Truck-Chock In-Ground Wheel Restraint

4. Specialty dock levelers

·         Serco Versadock Dock Leveler

o   truck bed heights are extendable beyond 12″ reach of most conventional levelers

o   Serco Power-Assisted Dock Leveler Model PAL

o   it combines two of the proven technologies, the durability of a mechanical leveler and Serco’s proven and high-performance hydraulic operation

·         Serco Vertical Dock Leveler

o   it has a patented hinged bottom draft pad

·         Serco Vertical Hydraulic Rail Leveler

o   it is an ideal solution to increase efficiency during rail car loading operations.

5. Dock and In-plant lifts

·         it performs the heavy lifting and automates the tasks that usually cause back-related injuries.

·         It has nine (9) types

o   Serco Level Lift Model

o   Serco Rail Lift Model

o   Serco Loadwarrior Air Lift Model

o   Serco Loadwarrior Turntable Model

o   Serco Scissors Dock Lift Model SDL68-5

o   Serco Loadwarrior Double Scissors Table Model

o   Serco Loadwarrior Tilter Model

o   Serco Loadwarrior Scissor Table Model

o   Serco Loadwarrior Air Tilter

These levelers are high quality and they are engineered to provide the most efficient operation to effortlessly support the operation of the manufacturing facility.

For your needs about mechanical dock levelers, hydraulic dock levelers, air-powered dock levelers, specialty dock levelers, loading dock equipment, loading dock, loading dock leveler Angier NC, and loading dock leveler Farmville NC, you may visit our official website to learn more at https://www.passportdockanddoor.com/products/dock-levelers-lifts/

For your queries, you may reach us at the following contact numbers:

·         Angier: (919) 639-0334

·         Farmville: (252) 753-6100

You may also send your service request through our webpage at https://www.passportdockanddoor.com/service-request/

For utmost service delivery, our local service areas are always ready to serve you at North Carolina, Angier NC, and Farmville NC.